FCP | Posiflow Sensors for Walchem Pumps

Posiflow Flow Verification Sensor

Feed verification has never been better! The PosiFlow® Sensor will verify that your metering pump is truly moving liquid into the system and has not lost prime.

Benefits:

• Provides accurate and non-intrusive flow verification.

• No moving parts in the sensor eliminates any concern of plugging, leaking or jamming of the flow path or sensing mechanism.

• Sends out a signal with every stroke as long as there is liquid pumping against pressure.

• EW-Y Series pumps take the PosiFlow signal directly, monitoring the feedback against pump operation.

• Install PosiFlow® on the discharge side of the metering pump, and connect to the digital input option card of the WebMaster.

  • Supplies a contact closure to the WebMaster every time the metering pump pulses and the sensor detects fluid movement.

  • Controller will send an alarm if the pump should be operating but no flow pulses are received.

  • Controller can also use a programmable volume-per-stroke value to totalize the volume of chemical feed.