Product details
Spot an error? Let us know!
Headline
EX800
Fixed Depth Insertion Magmeter
EX800-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments.
Features & Benefits
Features:
- Low-flow performance and accuracy superior to any mechanical flow sensor
- No moving parts to wear out
- Dedicated fittings for simplicity
- Retainer clip automatically sets correct depth
- Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
- Simple pulse train output can be used with any SeaMetrics signal processing module, or sent directly to a PLC
- Available for pipe sizes 1″ to 12″, in brass, 316 stainless, and PVC
- Certified to NSF/ANSI 61 Standard (stainless version)
Additional Notes
| Specs | Value |
|---|---|
| Pipe Size | 1” to 12” |
| Power | Full Power: 12 - 24 Vdc, 250mA Low Power: 12 - 24 Vdc, 40mA average with 250mA peaks |
| Housing Materials | Powder-coated cast aluminum |
| Sensor Body Materials | 316 Stainless Steel, Brass, or PVC |
| O-ring Materials | EPDM (Viton optional) |
| Electrodes Materials | Hastelloy |
| Electrode Cap Materials | PVDF (Kynar) |
| Minimum Conductivity | 20 microSiemens/cm |
| Flow Velocity | 0.28 to 20 ft/sec (0.08 - 6.09 m/sec) |
| Accuracy | ± 1% of full scale |
| Output | Square wave pulse, opto-isolated, 500 Hz @ 20 ft/sec |
| Empty Pipe Detection | Software, defaults to zero flow |
| Cable | Standard 18’ (6m), #22 shielded twisted pair, 4-conn. Max. cable run at 24 Vdc = 1000’ (300m); at 12 Vdc = 500’ (150m). For other circumstances, contact the factory. |
| Environmental | See meter mounted electronic specification for rating. |
| Regulatory | Mark (applies to full power sensor only configuration and full power FT 430/440 mounted configurations). Certified to NSF/ANSI standard 61 and NSF 372 (Stainless only with EPDM O-ring. Viton pending) |
Dimensional drawings
Call or text: +1 (484) 544-0506
The Supplyline team is here to help!